Superconductors

Superconductors seem like magic to many people. They are perceived as a metal conductor extrapolated to zero resistance. In reality, superconductors are NOT magic, and the realities of their behavior limits their usefulness for cutting edge systems such as the launch loop.

There are many good books on superconductors, such as "Engineer's Guide to High Temperature Superconductivity" by James Doss, Wiley 1989. I studied superconducting electronics under Ted Van Duzer at UC Berkeley, and my thesis was about superconducting logic. I now work with billion transistor chip designs, and forgot most superconductive lore, but I still remember a few key points.

What is a superconductor ?

Superconductors are macroscopically quantum-ordered collections of free electron and phonons (vibration quanta) in various materials; metals, alloys, and ceramics. They occur at low temperatures, where thermal energy does not disrupt delicate quantum couplings in these collections. All superconductors contain both ordered "superconducting" electrons and normal electrons - both are subject to electrical and magnetic fields, but only the superconducting electrons exhibit zero resistance in limited conditions. Superconductivity can be quenched by a combination of magnetic fields and temperature. The maximum critical field H_c is a function of temperature; it is maximum at absolute zero temperature, and zero at the critical temperature T_c .

Detecting superconductivity in experimental materials

Jumps in resistance in a bulk sample are not a reliable indication of superconductivity - resistance drops with temperature in most conductors, and resistance measurements can be upset by mechanical fixturing and material phase changes as materials cool and contract. For thin films of candidate materials, the best resistance measurement is a "four point" Kelvin measurement, where a thin strip of material is deposited on insulating ceramic or glass, and contacted at the ends to supply a current, and tapped at two points in the middle to measure the voltage drop caused by the current. Even this is not foolproof; this is also the setup for a resistive strain gauge, and differences in thermal expansion can add resistance to the setup, as can microfractures and grain boundary slips in the sample. At best, competent resistive measurements are a cheap way to screen candidate materials for further testing.

The gold standard for testing superconductivity is the Meissner effect. Superconductors behave like "diamagnetic" materials at modest magnetic fields; they exclude magnetic flux, making it go around the sample. This can be detected with the right instruments and experimental setups, even if we are measuring little embedded bits of superconductor in a jumble of materials. Meissner effect can be dramatic; it is why a chunk of superconductor will hover above a strong magnet, or vice versa.

If someone claims to have discovered a superconductor based on a fractional percentage resistance change as they cool some aggregate material, they have not completed the task. If they are doing a two-point resistance measurement, especially with cheap ohmmeters, they are almost certainly fooling themselves. Real superconductivity is hard to achieve, but dramatic when it occurs.

Type I superconductors

Pure metals tend to be type 1 superconductors, and have low T_C and H_C . They are good for superconducting circuitry and sensors, though, where power levels are low and repeatability is important.

Again, H_c decreases with temperature. If the material temperature is half of T_c , H_c might be 75% of the zero temperature value above. At 80% of T_c , H_c might be 45% of the zero temperature value above. You can't get both maximum temperature and field at the same time.

These are DC steady-state measurements. Remember that superconductors are a mix of superconducting electrons and normal "resistive" electrons. When you change currents, you produce a voltage field in a conductor due to its inductance. This voltage field moves both kinds of electrons, and while the superconducting electrons conduct most of the current, the resistive electrons produce a current that encounters resistance and dissipates heat. Because the heat capacity and thermal conduction of materials at low temperatures are small, even a small amount of heat can raise the temperature significantly. This increases the fraction of resistive electrons, which increases the heating.

This can lead to quenching, where the material heats above T sub C and heats faster as the resistance climbs with temperature. If the current is constant (typical in large magnets that store a lot of energy) the heat rapidly boils the coolant, creating high pressure gas and eventually an explosion.

To prevent this, superconductors for power lines and magnets are embedded in a much heavier matrix of copper or silver. That adds heat capacity and extra normal conduction path, reducing the sudden transition and giving circuit breakers and arc dissipation systems time to work. That can keep the system from exploding, but not from ceasing to function.

Current depth

Type II and High Temperature Superconductors

The newer ceramic High Temperature Superconductors are still poorly understood theoretically. They can have critical fields above 100 Tesla, and critical temperatures above 100 Kelvins. Their behavior is more complex, with with anisotropic (direction dependent) critical currents and fields. They are also quite brittle, not ductile like metals and alloys. HTC superconductors are still mostly experimental, though some companies are selling wire tapes with HTC bonded to copper, brass, or silver in kilogram quantities (not tons) for prototype development. These very high T_c materials can be used with liquid nitrogen as a coolant at 77K ( -196C or -320F ), but the H_c and J_c are lower than they would be at colder temperatures.

Because HTC materials are complex, difficult to make, and poorly understood, the field is rife with false discoveries, mistakes and retractions. Some poorly equipped foreign labs are especially prone to claim new records for high temperatures, and a few lone individuals in the US are making unlikely claims as well. Even if some of these claims pan out, and even if someone produces the "holy grail" of a room temperature superconductor with a T_c greater than 300 Kelvin, such speculative materials will still need a high H_c and J_c to be useful, will need to be reliably manufacturable, and will still require refrigeration so they are far enough down the phase diagram to support significant fields and current. A hypothetical room temperature superconductor would need a T_c greater than 400 Kelvin to use water cooling and exhaust heat to ambient air. That is almost three times higher than repeatable and verified HTC lab results, and almost four times the temperatures of deployed materials. Don't hold your breath ...

Magnetic fields in conductors and magnets

Magnetic fields are complicated. The H field near a round wire is proportional to the current, and inversely proportional to the distance. The fields from multiple wires add together, and influence each other. Because of Meissner effect, the fields are pushed out to the edges of a wire and concentrated there - this effect is pronounced in wire tapes and other non-circular wires.

So if you make a coil of superconducting wire, intending to create a high magnetic field strength in the center, the field near the superconductors themselves may be a large multiple of the field in the center. So, an HTC material with a critical field of 100 Tesla may only be capable of producing a field of 10 Tesla in the middle of a cylindrical coil. This effect is most pronounced when a small bundle of superconducting wire is expected to produce a high field many radiuses away. If you want 1 Tesla 10 meters away, then a bundle of wire 10 centimeters across will have 100 Tesla fields near it, and more at the surface of the wires themselves.

Magnetic fields store energy, proportional to the square of the field times the volume. A cubic meter of volume containing a 5 Tesla field stores 10 million joules, almost 3 kilowatt hours. That is the energy and pressure equivalent of 100 atmosphere compressed air, and the structural demands are similar.

Magnetic fields also produce tremendous forces on current carrying wires. Two wires with current in the same direction attract each other. Two wires with opposite currents repel. So the fields in a coil want to "explode" the space and dissipate the field, pushing the circumferential wires outwards and away from each other. They also push neighboring wires with currents in the same direction together. The latter increases the field in the wires themselves, and causes resistive heating. Unless superconducting wires are anchored very firmly, they are likely to heat and quench and explode.

Conclusion

Superconductors are difficult to work with. They have many practical applications, such as sensors, DC magnets, and as part of laboratory and space probe experiments. HTC superconductors appear in prototype motors, generators, maglev trains, and energy storage coils, but they are not widely deployed. It is good to experiment with these materials, but we should not depend on them to make difficult ideas easier; if anything, they add complications and barriers to deployment.

Launch loops will someday use superconducting magnets. As launch volumes approach kilotons per second, waste heat will begin to have noticeable environmental effects, and we will need to reduce heat using any reliable technology available. However, in the short term, robust operation and cheap startup costs are more important, so we can replace rockets as soon as possible. Copper, iron, and cooling water are well understood, and we should focus our attention on problems such as stability and hypervelocity spalling, and developing initial markets for loop technology. Find solutions for widespread human and environmental problems, not makework for narrowly specialized materials scientists.

Seek customer dollars, not research grants.