Differences between revisions 12 and 13
Revision 12 as of 2011-06-23 22:40:14
Size: 8702
Comment:
Revision 13 as of 2011-06-23 22:41:52
Size: 8644
Comment:
Deletions are marked like this. Additions are marked like this.
Line 14: Line 14:
|| Number || Probability || Occurences   ||
|| || ||
per 10 years ||
|| Number || Probability || Occurences<<BR>>per 10 years ||
Line 37: Line 36:
|| Number || Probability || Occurences   ||
|| || ||
per 10 years ||
|| Number || Probability || Occurences<<BR>>per 10 years ||

Space Elevator Displacement

The lower portion of the space elevator, below 2000km altitude, must be able to move to avoid satellites and space debris in LEO orbit. According to the ESA Meteoroid and Space Debris Terrestrial Environment Reference ( MASTER-2005) there are more than 600,000 objects larger than 1 cm (0.4 in) in orbit. Assuming a 1000 kilometer altitude circular orbit, the average orbital period is 105 minutes, and these objects cross the equator twice in that time.

The current NORAD tracking accuracy (for a tiny fraction of those objects) is 1 kilometer. NORAD is not especially concerned with avoiding collisions with small debris - their main mission is protecting big assets like the space station from big collisions, and watching for incoming ICBMs. Given that radar return power goes down as the 4th power of the distance, we can expect the "1km accuracy" is much better at 200km altitude, and much worse at 2000 km altitude. As we will see, the higher altitude objects are challenges in many ways.

The average debris flux passing through a 1 km wide (east-west) vertical band is about 15 per hour. The number passing through a 1km wide cylindrical column will be higher, as the flux will be divided by the average of the sine of the inclination. Assuming an average inclination of 45 degrees, the flux passing through our cylindrical column will be about 21 per hour. The average time interval between objects passing through our cylinder is 172 seconds.

But that is an average interval. If we assume an average rate of 0.35 objects per minute, the probability of 0, 1, 2, 3 ... per minute will follow a Poisson distribution:

Table 1: Objects per minute, 1 km cylinder

Number

Probability

Occurences
per 10 years

0

0.704688

3706377.48

1

0.246641

1297232.12

2

0.043162

227015.62

3

0.005036

26485.16

4

0.000441

2317.45

5

0.000031

162.22

6

0.000002

9.46

7

0.000000

0.47

Over the course of 10 years, we have an even chance of having to dodge 7 objects, along a 2000 kilometer high vertical column, in one minute. That will be difficult, the ribbon will have multiple jigs and jogs propagating up it. Probably impossible, especially as climbers on the ribbon will prevent rapid movement for the ribbon above them. So some of those objects will pass within our cylinder - if the ribbon is 20 cm wide, each of those objects has a 1/5000 chance of impacting the ribbon.

Further, this assumes accurate and complete debris catalogs and ephemerides. As we enter the "Kessler Syndrome Era", many debris objects will be created by over-the-horizon collisions, with new orbital parameters, and will travel for many orbits before they are encountered by the space debris tracking network. The only reliable way of characterizing and avoiding debris is to Radar.

So, make two bold assumptions:

  • We are doing our own tracking, with complete coverage to 2000 km altitude, and

  • We can characterize incoming object trajectories accurately, to within 20 meters

That changes our table above. Assume we need 5 minutes to move the ribbon 20 meters at 2000 kilometers altitude (difficult, as we will see below!). Our collision table now becomes

Table 2: Objects per five minutes, 20 meter cylinder

Number

Probability

Occurences
per 10 years

0

0.965605

1015739.65

1

0.033796

35550.89

2

0.000591

622.14

3

0.000007

7.26

4

0.000000

0.06

Over the course of 10 years, there will be about 7 times when we will need to avoid 3 objects at once over a 5 minute period. This time, the chance of an impact is 0.2/20, or 1 in 100, so if we can only avoid 2 at once, we will have a 7% chance of collision and possible failure from these events. Even very good tracking does not keep us completely out of trouble!

The climber filtering problem

The speed of propagation of a transverse jog of the ribbon is the proportional to the square root of the specific loading. A ribbon loaded to 30 Mega Yuri will have a transverse (back and forth, not up and down) propagation speed of 5500 m/s . However, the worst case is that there is a climber above this section of ribbon, slackening the ribbon below to a lighter loading. That slows down speed of propagation, which is unfortunate in two ways, as we will soon see. Assume that the ribbon below a climber is slackened to 16 MYuri, for a propagation speed of 4000 m/s.

Since the ribbon is tapered, we will get mechanical reflections. The result is that the heavier ribbon above will move less than the ribbon below.

The worst case is that the climber is in between us and a section of ribbon we have to move. The mass of the climber will resist lateral movements. Assume the climber is at 1200km altitude, and we need to move the ribbon just above it.

SEdisplacement.png

The tension below the climber is T = 160 KN, the mass per meter is \lambda = 0.01 kg/m. While the ribbon is actually tapered and stretched (changing density), ignore those effects for now. This means the transverse propagation velocity is V_T = \sqrt{ T / \lambda } = 4000 m/s

Assume we move the bottom of the ribbon by x_m = 500 meters in t_m = 25 seconds, resulting in lateral velocity of v_m \equiv x_m / t_m = 20 m/s. This results in a 500 meter wide moving edge (100km high) propagating at 4000m/s . Assume the climber is at 1200 kilometers altitude (effective gee = 6.9 m/s), and weighs 20 tons, putting an additional 138 KN load on the ribbon above. The total loading on that ribbon is approximately 160KN+140KN+100KN, or 400KN, so for a 30 MYuri design the ribbon above the climber weighs 13 g/m and the propagation speed above the climber is 5500 m/s.

The edge travels from the ground to the climber in 300 seconds. The edge is moving laterally at 20m/s, and involves 100km or 1000kg of tether, so the total momentum in the forward wave is 20,000 kg-m/s. When the wave hits the climber, it will reflect, dumping not only the momentum of the forward wave but that of the reverse wave as well, minus the momentum launched by the now-starting-to-move-sideways climber. 40,000 kg-m/s will accelerate the 20,000 kg climber to 2 m/s, so the reverse wave is diminished from 20 m/s to perhaps 18 m/s

The reverse wave bounces off the anchor point and returns in another 600 seconds. Meanwhile, the moving climber is itself launching transverse energy up and down the ribbon, so it will decelerate, stopping and perhaps swinging back long before the next reflection arrives.

As a wild guess, the climber may have moved 60 meters 360 seconds after we start moving the anchor point.

The actual behavior of the ribbon and the climber will be rather complex, but keep in mind that the whole system, including the tapered ribbon above, will propagate horizontal waves of energy above and below. Because of reflections at mass discontinuities like climbers, there will be resonances, and the resonant energy will be difficult to remove by launching upwards waves from the anchor point. A complete and accurate assessment of ribbon position will be needed by the control system, and that will feed some big simulations driving some big motors making big displacements.

Damping out 90% of the unwanted transverse energy in the space elevator may require (WAG) 10 round trip times from anchor to counterweight; at an average of 5km/sec prop delay, that would be almost 5 days. Remember that all this resonant energy is adding to the transverse position of the ribbon at potential collision points, and we must know that position within some fraction of 20 meters in order to accurately dodge impactors.

Because of the large propagation times, we will need to anticipate upper-tether movements many minutes before we need to move them. With debris objects at 2000km altitude moving at 7000 m/s, 7 minutes of warning means a 3600 km radar range, very difficult for tracking centimeter-scale objects. See Radar for some possibilities.

MORE LATER

SEdisplacement (last edited 2011-06-24 05:40:04 by KeithLofstrom)